Quick steps to block streetlight (visitor-friendly)
- Find the blackout layer: it’s thicker/heavier than the sheer curtain.
- Close fully and overlap in the middle (most light leaks there).
- Seal the sides: tuck curtains behind the window frame if possible.
- Seal the bottom: a rolled towel at the window sill can block upward light.
- Turn off/cover indoor LEDs (router, AC receiver, chargers).
Common “why is it still bright?” causes
- Only the sheer curtain is closed (blackout layer still open).
- Panels don’t overlap in the middle.
- Light is leaking from the sides due to a short curtain rod.
- Indoor LEDs (router/modem, air conditioner) are shining into the room.
Easy backups: sleep mask + white noise
If you’re sensitive to light (or jet-lagged), a sleep mask is the simplest fix. White noise can also help if your place is bright because it’s on a busier street.
Direct booking makes comfort issues easier
If curtains are missing, damaged, or don’t close properly, direct booking makes it easier to get a quick fix or a simple workaround.
FAQ
Do blackout curtains block 100% of light?
The fabric can, but gaps around the sides/top/bottom often leak light. Overlap panels and seal edges for the best result.
What if there are only sheer curtains?
Use a sleep mask as the fastest fix and message your host—many can add a blackout layer or provide a temporary solution.
How do I handle bright LED lights in the room?
Turn devices so LEDs face away, cover with a small piece of tape, or place a cloth so it blocks light without blocking airflow.